Submit
CORS stations output standard RTCM data, which can be integrated with DJI drones.
The reason is that the OS system imposes limitations. To address this, you can modify the callback events in the ESP32C3 firmware and update the BLE GAP connection parameters to better comply with the requirements of the iOS system.
Default UART0 (RX: GPIO21, TX: GPIO20) outputs logs.
There are various factors affecting AT throughput testing. You can use the iperf example from ESP-IDF for testing (when testing with AT, use transparent transmission mode and adjust the data size to send continuously as 1460 bytes).
Supports openocd, gcc, and other open-source tools. For specific usage instructions, please refer to the link on the right.
1. Add the development board link in the preferences: https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json.
2.Select the ESP32 C3 Dev Module as the development board.
AT+NVS and AT+SYSSTORE=1;
It does not support Chinese SSID. To enable support, firmware modification is required.
Store
