Design sketch
Dimensions
Pin Definition
Package
Multifunctional WiFi + BLE Combo Module that Supports Transparent Transmission, Bluetooth Network Configuration and AT Command Configuration
The ME16WS03 Wi-Fi 6+BLE Combo module uses a combination of WLCSP nRF7002 and WLCSP nRF5340 chips to support BLE mode, Wi-Fi 6 dual-band connection, 2.4G and 5G functions, 1T1R. WiFi maximum rate of 86mbps, output power up to 21dBm, receiving current of 56mA in the 2.4G band and 58mA in the 5G band. It also supports BLE master-slave mode and transparent transmission mode. It uses independent antenna design for WiFi and BLE, which do not interfere with each other, and the antenna interface is IPEX. One device can support both WiFi and BLE wireless connection modes.
Chip Model | nRF7002+nRF5340 | Antenna | IPEX |
Module Size | 23.2×16×3.6mm | GPIO | 23 |
Flash | 1MB+256KB | RAM | 512KB+64KB |
Receiving Sensitivity | -98dBm | Transmission Power | BLE:-40 ~ +3dBm WiFi:+21dBm |
Current(TX) | 2.4G-191mA 5G-260mA | Current(RX) | 2.4G-56mA 5G-58mA |
Firmware | / |
Parameter | Value | Notes |
Operation Voltage | 1.7V-5.5V | To ensure RF operation, the BLE power supply voltage is recommended to be no less than 3.3V WiFi supply voltage is recommended to be no less than 3.6V |
Working Temperature | -40℃~+85℃ | |
Transmission Power | BLE:-40 ~ +3dBm WiFi: +5 ~+21dBm | Configurable |
Current (RX) | 2.4G-56mA/5G-58mA | |
Current (TX) | 2.4G-191mA/5G-260mA | BLE 2Mbps transmission |
Module Dimension | 23.2x16x3.6mm | |
Quantity of IO Port | 23 | USB/UART/ADC |
Store
