Frequently Asked IoT Module Questions

All questions Basic Question Type Selection Module Test Module Function Summary of customer questions

Submit

Does the MS12SF13 module support customer secondary development?

Time2023-08-31

This module supports customer secondary development.

How to save AT parameters to flash in the MS11SF1 module?

Time2023-08-31

AT+NVS and AT+SYSSTORE=1;

Does the MS12SF13 module have default factory firmware?

Time2023-08-31

Currently, the module is blank by default.

Does the MS01SF1 UWB Module support AOA?

Time2023-08-31

AOA stands for Angle of Arrival, which involves multiple antennas. If the MS01SF1 is used as a receiver, it cannot perform AOA since it lacks two antenna pins for this purpose.

Does the MS12SF13 module support AT commands?

Time2023-08-31

The module currently does not support AT commands.

Is it necessary for a GNSS module to have inertial navigation support in order to output heading information?

Time2023-08-31

Heading refers to the direction of device movement and is unrelated to the inertial navigation unit. Inertial navigation merely calculates position information when signals are obstructed.

Why is MS36SN4 called a "Positioning and Orientation Module," while other modules that can also output heading information are not referred to as "orientation modules"?

Time2023-08-31

The MS36SN4 supports dual antennas and can provide heading information when stationary or in slow motion, whereas other modules cannot achieve stationary heading output.

Does enabling or disabling the MS34SNA GNSS inertial navigation module save power?

Time2023-08-31

Disabling the inertial navigation will certainly reduce power consumption, but the difference in power consumption compared to when it's enabled is not significant, so it doesn't hold much significance.

< 28 29 30 31 32 33 34 ... 41 >