Frequently Asked IoT Module Questions

All questions Basic Question Type Selection Module Test Module Function Summary of customer questions

What open-source tools does MS11SF11 support (with provided compilation routines)?

Time2023-08-21

Supports openocd, gcc, and other open-source tools. For specific usage instructions, please refer to the link on the right.

How to configure the environment for a WiFi module in the Arduino IDE?

Time2023-08-21

1. Add the development board link in the preferences: https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json.

2.Select the ESP32 C3 Dev Module as the development board.

How to save AT parameters to flash in the MS11SF1 module?

Time2023-08-31

AT+NVS and AT+SYSSTORE=1;

Does the MS11SF1 module support Chinese SSID?

Time2023-08-31

It does not support Chinese SSID. To enable support, firmware modification is required.

Does the MS12SF13 module support customer secondary development?

Time2023-08-31

This module supports customer secondary development.

How to save AT parameters to flash in the MS11SF1 module?

Time2023-08-31

AT+NVS and AT+SYSSTORE=1;

Does the MS12SF13 module have default factory firmware?

Time2023-08-31

Currently, the module is blank by default.

Does the MS01SF1 UWB Module support AOA?

Time2023-08-31

AOA stands for Angle of Arrival, which involves multiple antennas. If the MS01SF1 is used as a receiver, it cannot perform AOA since it lacks two antenna pins for this purpose.

< 25 26 27 28 29 30 31 ... 39 >