Wifi Module MS11SF1 has two internal 12-bit SADC, a total of 6 channels without DAC interface. (The users can consider using SPI external DAC chip, if they want to make additional DAC)

MS11SF1 has three SPI interfaces. SPI0\SPI1 can be used to increase the storage space, and SPI2 belongs to the general-purpose SP1.

The wifi module MS11SF1 has two UART interfaces and debugs the official firmware,

which can be configured for BLE pass-through or WiFi pass-through by using AT commands.

AT firmware with up to 3 slaves by default.

You can use the Flash download tool, choose ESP32C3 as the chip, and debug the existing firmware; The tool can be downloaded from the MInewSemi official website.

Yes,it can. Both BLE and WiFi can use the same antenna, with the command: AT+RFPOWER to set the transimission power.

You can use the Flash download tool, and choose the chipset ESP32C3 , and debug the existing firmware. And the tool can be downloaded from MinewSemi official website.

Yes, it can. BLE and WiFi use the same antenna, with the command: you can use AT+RFPOWER to set the transmitting power.