Design sketch
Dimensions
Pin Definition
Package
MS11SF1 module is an Wi-Fi 4 & BLE 5.0 Module based on ESP32-C3. It features an RISC-V 32-bit single-core processor with an operating frequency of up to 160MHz. The MS11SF1 supports development using AT commands, sending AT commands through the serial port to configure Wi-Fi and BLE to achieve the pass-through function. Besides, you can develop your own firmware by using the ESP-IDF development framework.
The MS11SF1 comes with 22 GPIO pins and integrate a rich set of peripherals including UART, SPI, I2C, I2S, ADC, TWAI (compatible with ISO 11898-1 protocol), LED PWM controller, USB (compatible with 2.0 full speed standard), JTAG controller, temperature sensor, RMT (infrared remote control), and etc.
.webp)
Model NO. | MS11SF11 | Flash | 4MB |
Antenna | PCB | RAM | 400kB |
SoCset | ESP32-C3 | Emission Current | 278mA |
Dimension(mm) | 16.6*13.2*2.2 | Receive Current | 87mA |
Wi-Fi Version | Wi-Fi 4 | Sleep Current | 6uA |
Bluetooth Version | BLE 5.0 | GPIO | 22 |
Applications | Security warning devices, smart meters, building automation, agricultural sensors, smart cities, retail store sensors, street lighting, environmental sensors, smart parking, smart medical | ||
Store
