High Gain Vehicle Navigation Antenna
AN10a is a GNSS active antenna that supports GPS L1, BeiDou B1 and GALILEO E1 frequencies at the same time, which can be widely used in vehicle navigation, location tracking, security and other application scenarios.AN10a has a built-in high-gain low-noise amplifier and adopts a high out-of-band suppression filter to filter out the interfering signals, which ensures that it can still work normally in the harsh electromagnetic environment. The antenna is characterized by high gain, wide primary beam, waterproof, etc., and can work outdoors for a long time.
AN10a-GNSS Active Antenna | |
Patch Architecture | Ceramic structures |
Center receive frequency range (MHz) | 1561-1575.42MHz |
Bandwidth (MHz) | ≥2.0dBi |
standing wave ratio | ≤1.5dB |
Gain | 3.5dB |
Polarization mode | right circular polarization |
Characteristic impedance | 50 ohm |
LNA | |
Center frequency range | 1561-1575.42MHz |
LNA Gain | 28±2 dB |
standing wave ratio | ≤2.0 |
Coefficient of noise | ≤1.5dB |
Operation Voltage | 3-5V |
Operation Current | 12mA typ.(3.3 VDC) |
Mechanicals & Environmental | |
Dimension | see attached figure |
Connector | Female needle with internal thread |
Cable Length | 2.0m |
Radome | ABS+PC |
Weight | 60g |
Attachment Method | Magnet/Adhesive Stickers |
Operating Temp | -40℃~+85℃ |
Storage Temp | -45℃~+85℃ |
Humidity | 95% No-condensing |
Waterproof | IP66 |